In stock

MiniTeddy 12V / 2A


Teddy Pardo 12v-2A Audiophile-Grade Linear Power Supply, perfect match for RME ADI-2 DAC, Uptone EtherRegen, Melco N100, Chord Hugo, Nagra Jazz and many others.

The design is based on the experience gained with the TeddyCap family of power supplies for Naim Audio equipment, and uses the same technology.

- +
Spend $1,500 to get Free Shipping


 The MiniTeddy12/2 power supply can be used to replace the small AC plug-in power adaptor that comes with many audio equipment, routers, streamers etc, and provides significant improvement in sound quality.

The design is based on the experience gained with the TeddyCap family of power supplies for Naim Audio equipment, and uses the same technology.


  • Uptone EtherRegen.
  • Nagra Jazz
  • Many professional computer-interface cards, such as Merging Anubis, RME ADI-2Pro, UAD Apollo Twin etc.
  • Many routers and switches, such as Netgear, Linksys, etc.
  • Many DACs, such as RME ADI-2FS, Chord 2Qute/Hugo etc.
  • Streaming products, such as Melco N100/S100.

Recommended by Alex of Uptone Audio:

Since our own UltraCap LPS-1.2 is no longer in production (thanks Intel for putting Altera Max10 FPGAs on indefinite hiatus!), and since our fine JS-2, choke-filtered, dual-output, 5~7.4A LPS is a bit overkill for the EtherREGEN, we are happy to recommend the following affordable and high quality discrete-regulator LPS from Teddy Pardo.

Checkout this video review of Teddy-Powered Nagra Jazz preamp:


In general, you’ll experience more clarity, tighter bass, more detail, better dynamics, natural voices, better soundstage etc.


The small power supply which is provided with most types of equipment is based on a technology called Switch Mode. Using this technology it is possible to create small, efficient, and low cost power supplies. Unfortunately due to their method of operation (high frequency capacitor charging), these power supplies are also very noisy, causing degradation in sound quality. As an alternative, several after market power supplies exist which are usually based on Linear Regulators. These regulators provides an improvement over the original power supply but as can be seen on the graph below are still limited in their performance.

The MiniTeddy12/2 power supply is based on a superior regulator called SuperTeddyReg and provides a significant improvement over linear regulators.

The following graph shows the noise level measurements of the original wall wart power supply (red line), an alternative power supply based on a Liner Regulator (blue line), and the MiniTeddy12/2 power supply (black line). The brown line is a zero Volt reference which is actually the measurement equipment internal noise. As can be seen the Teddy12/2 power supply noise level is very close to the zero Volt reference.

For more information about our power supplies read here...


The MiniTeddy12/2 power supply is equipped with a high quality pure copper cable, made in Germany.

Share with:

Weight 2 kg
Dimensions 24 × 16 × 6 cm

3.5mm / 1.3mm (Musical Fidelity etc), 5.5mm/2.1mm, 5.5mm/2.5mm, 5.5mm/2.8mm, Lemo3 (Nagra), -, 4.7mm / 1.7mm (Roku)

12 reviews for MiniTeddy 12V / 2A

Customer Images

Image #1 from TSAI CHUN HSIEN 蔡俊賢
Image #1 from TSAI CHUN HSIEN 蔡俊賢


Powered the router via MiniTeddy in streaming system and increvied density wilder song stage and more musician. Highly recommend!

Image #1 from TSAI CHUN HSIEN 蔡俊賢
5.0 Rating
1-5 of 12 reviews
  1. Great seller and best Product. I have 2 PS from Teddy. Both are working like charm.

  2. Significant upgrade for my Clearaudio Performance DC Air turntable!

  3. Been using this to run my Clear Audio Concept ttl. So far so very good.

Add a review
MiniTeddy 12V / 2A MiniTeddy 12V / 2A
* Rating is required
* Answer is required
Your review
* Review is required
* Name is required
Add photos or video to your review