The Bluesound Icon Power Supply Upgrade Kit replaces the internal switch-mode power-supply in the Node Icon streamer, with a Teddy Pardo Audio high performance external power supply.
This upgrade kit can be installed in 10, without requiring any special tools or soldering, making it suitable for non-technical users. The result is a big step forward in the sound quality of the, bringing it very close to the level of network streamers costing twice as much..
In the press: The Absolute Sound
In May 2026, Vance Hiner of The Absolute Sound published “Teddy Pardo Bluesound Upgrades”, a test of two ways to power the Node Icon with our supplies. With the DIY kit he heard a more relaxed sound, extended bass, better detail in the upper frequencies and more air, with no loss of dynamics or detail. He also found it softened the harshness he had noticed in the stock DAC. Stage 2, our internal upgrade installed by Hardcore Hifi, was a less dramatic change for streaming. He still heard more ease, blacker backgrounds, finer detail and a slightly wider soundstage, and thought it worth the extra cost. His conclusion: with these supplies the Node Icon can compete with pricier streaming DACs.
Background
The Node Icon is originally equipped with a low-cost switch-mode power supply, similar to the power supplies that can be found in many consumer level products. This power supply has insufficient performance level in term of clean power delivery, resulting in mediocre overall sound quality. The upgrade kit offered here brings the Node Icon a major step forward, both in analog and digital outputs.
MiniTeddy Mk2 (released 09/2024)


The MiniTeddy Mk2, scheduled to start shipping on 09/2024, is a complete redesign of the standard edition. It is based around our new Tedinator discrete voltage regulator.
The Tedinator is a fully discrete design, based entirely on ultra low noise JFET transistors with no IC chips. It is the result of countless hours of development, testing and listening. Its design is inspired by the writings of great minds like Walt Jung and Nelson Pass.
With the new Tedinator and the new circuit around it, we were able to achieve impressive new levels of low noise, low output impedance and fast response time, resulting in a highly involving sound, perfectly timed and with no apparent phasing errors, hence our new slogan : The Art of Silence.
Node Icon kit contents:
- MiniTeddy Mk2 power supply with 5v DC output.
- Custom-made rear panel adapter, wired with DC plugs.
- High quality DC cable.
New (03/2026): Bluesound Node Icon Stage 2 Upgrade
The Stage 2 Upgrade bypasses the internal power distribution network inside the Node Icon, and replaces it with an external power supply, delivering 3 seperate supply rails:
- Bipolar +/-12v for the analog+DAC section.
- 5v for the digital control section (on board computer).
This upgrade does away with noisy components in the original power distribution network, resulting in a lower noise floor, better dynamics and a wider soundstage.
The Stage 2 upgrade is not available as a DIY kit, and can only be performed in Teddy Pardo Audio HQ, as well as Hardcore Hifi in the USA.
The Stage 2 includes:


Sound
Comparing with the Node Icon in its original form, the upgraded model reaches sound quality levels that surpass network streamers at twice the cost: it shows better focus and clarity, wider and deeper soundstage, and deeper bottom octave.
Comparison to other conversion solutions
We asked a customer to describe the differences between Teddy Pardo external power supply, to another solution which can be assembled internally. Here are his comments:
Teddy Pardo’s power solution is much easier to install, takes less than 15 minutes from start to finish. The soundstage is wider and more focused, the presentation is more relaxed, better balanced and easy on the ear on long listening sessions.
Conversion instructions:
Step 1: Disconnect the Node Icon, turn it upside down, remove rubber seal and 4 screws
Step 2: gently pull the bottom cover upwards, starting from the side where the headphone socket is located
Step 3: Remove the power supply plastic cover, disconnect the two plugs connecting the power supply (Marked in green below)
Step 4: Remove the internal power entry socket, held in place by two connecting screws
Step 5: Insert the panel adapter, with text facing upwards, use the original screws from step 4
Step 6: Insert the plug connecting the main board, make sure it’s locked in place, note the plug lever direction
Step 7: re-assemble to plastic cover to to the original power supply, there is no need to remove it.
Step 8: re-assemble the bottom cover , re-place the rubber seal
Step 9: Assembly is now completed, the power entry looks as following, ready to accept an external power supply:
Tedify your Bluesound Node Icon with a linear power supply upgrade kit.
What does it mean to Tedify? To Tedify a system is not to replace it. It is to help it reveal more of what is already there, through silent power, carefully matched to a wide variety of devices. Learn more













I ordered the power supply, hoping for some improvement.
When I hooked it up, there was an instant lose of words, I could only marvel.
Highly Recommend!
great sound improvement when you listen carefully
Jeden Euro wert. Hebt die Klangqualität deutlich an. Bin sehr zufrieden.
Deeper and tighter bass, wider and clearer sound image, impressive. The device is very nicely made and it’s great that it has a hidden power indicator, the light reflects off the surface. Small detail but very clever
Unreal! Turns a very competent DAC into a super-charged beast. Everything opens up even more; instruments are well separated with an expanded soundstage. Very easy to fit and turns the Node Icon into a rival for any DAC. If you are hesitating…… don’t!!