In stock

Teddy12/2 – 12V 2A Power Supply

1,738.501,921.50

Teddy Pardo 12v-2A Audiophile-Grade Linear Power Supply, perfect match for RME ADI-2 DAC, Uptone EtherRegen, Melco N100, Chord Hugo, Nagra Jazz and many others.

The design is based on the experience gained with the TeddyCap family of power supplies for Naim Audio equipment, and uses the same technology.

- +
Spend 5,490 to get Free Shipping
Loading...

Details

 The Teddy12/2 power supply can be used to replace the small AC plug-in power adaptor that comes with many audio equipment, routers, streamers etc, and provides significant improvement in sound quality.

The design is based on the experience gained with the TeddyCap family of power supplies for Naim Audio equipment, and uses the same technology.

Compatibility

  • Uptone EtherRegen.
  • Nagra Jazz
  • Many professional computer-interface cards, such as Merging Anubis, RME ADI-2Pro, UAD Apollo Twin etc.
  • Many routers and switches, such as Netgear, Linksys, etc.
  • Many DACs, such as RME ADI-2FS, Chord 2Qute/Hugo etc.
  • Streaming products, such as Melco N100/S100.

Recommended by Alex of Uptone Audio:

Since our own UltraCap LPS-1.2 is no longer in production (thanks Intel for putting Altera Max10 FPGAs on indefinite hiatus!), and since our fine JS-2, choke-filtered, dual-output, 5~7.4A LPS is a bit overkill for the EtherREGEN, we are happy to recommend the following affordable and high quality discrete-regulator LPS from Teddy Pardo.

Checkout this video review of Teddy-Powered Nagra Jazz preamp:

Sound

In general, you’ll experience more clarity, tighter bass, more detail, better dynamics, natural voices, better soundstage etc.

Performance

The small power supply which is provided with most types of equipment is based on a technology called Switch Mode. Using this technology it is possible to create small, efficient, and low cost power supplies. Unfortunately due to their method of operation (high frequency capacitor charging), these power supplies are also very noisy, causing degradation in sound quality. As an alternative, several after market power supplies exist which are usually based on Linear Regulators. These regulators provides an improvement over the original power supply but as can be seen on the graph below are still limited in their performance.

The Teddy12/2 power supply is based on a superior regulator called SuperTeddyReg and provides a significant improvement over linear regulators.

The following graph shows the noise level measurements of the original wall wart power supply (red line), an alternative power supply based on a Liner Regulator (blue line), and the Teddy12/2 power supply (black line). The brown line is a zero Volt reference which is actually the measurement equipment internal noise. As can be seen the Teddy12/2 power supply noise level is very close to the zero Volt reference.

For more information about our power supplies read here...

Interconnects

The Teddy12/2 power supply is equipped with a high quality pure copper cable, made in Germany.

Share with:


Weight 2 kg
Dimensions 24 × 16 × 6 cm
cable-type

3.5mm / 1.3mm (Musical Fidelity etc), 5.5mm/2.1mm, 5.5mm/2.5mm, 5.5mm/2.8mm, Lemo3 (Nagra), –

7 reviews for Teddy12/2 – 12V 2A Power Supply

5.0 Rating
1-5 of 7 reviews
  1. Excellent power supply. Well constructed and dead quiet. Ordering process was simple. Shipping to KY was about 2 1/2 weeks.

    Will be using Teddy again!

  2. The Teddy 12/2 made a noticeable improvement to the sound quality of my SOtM sNH-10G network switch. Highly recommended.

  3. I got this to replace the original switching power supply to an Etherregen. The Etherregen itself is somewhat of a happy mystery to me in the improvements it makes. Adding the TP power supply is at least as noticeable change as adding the Etherregen itself. Bass is much fuller and the soundstage widened. And that is straight out of the box for the power supply, no burnin. Just a wonderful addition to my digital chain.

  4. Outstanding upgrade to the RME dac. Gave the sound a more natural realism and full body.

  5. The power-supply arrived well-packaged and protected. I was very pleased with the metal-work, and quality level of the product in general. I am using this on an Uptone-Audio EtherREGEN device in place of the wall-wart type of power-supply. I can tell the background sound of the EtherREGEN is quieter and I think the lower registers have a little more weight. I’m sure just like any other piece of quality electronic gear, it will need some time to break-in, however right from the start, I can hear a difference. The Teddy Pardo Linear power-supply is a welcomed, cost effective and positive addition to my stereo system and improved listening experiences. Highly-recommended !

Add a review
Teddy12/2 - 12V 2A Power Supply Teddy12/2 - 12V 2A Power Supply
Rating*
0/5
* Rating is required
* Answer is required
Your review
* Review is required
Name
* Name is required
Add photos or video to your review